Frequently Asked Questions

The Fishmaster T-Top will fit all fishing boats with center consoles up to 50" wide. The innovative design allows the side legs to adjust to any width up to 50". The legs on each side (front to back) are 27.5" apart (center to center), and 31.5" apart (outsides of mounting feet). You will need a flat floor between these dimensions, on each side of the console, to mount the T-Top. If you have a step close to the center console, or your floor is not flat you will probably need a custom T-Top made if the mounting feet are at different levels. To view the exact dimensions of the T-Top choose the file you would like picture or PDF. To learn more about how the T-Top will fit your boat please review the instruction manual.

Shop T-Top Here

The top is 60" wide by 80" long and stands 81" above the floor of the boat. The following links provide detailed drawings of the T-Top dimensions. T-Top Dimensions PDF. The T-Top with fabric weighs right at 108 lbs with 4 rod holders attached.

The tubing is 1-1/2" schedule 40 pipe with a 1.900" outside diameter. The tube material is 6061-T6 marine grade aluminum that is polished and bright dip anodized which is the industry standard for T-Top, wakeboard towers, radar arches, tuna towers, etc. All the hardware is 316 grade stainless steel, also a workhorse of the marine industry. The fabric is Sunbrella Marine grade Acrylic.

Side doors up to 20" wide and 32" tall will be able to open normally. See the dimension drawings above. If your door is larger we include instructions to make the door easily removed by sliding out like provided on the new Boston Whalers.

All that is needed to install the Fishmaster T-Top is a drill, drill bits, basic hand tools and 3M 5200 Marine Adhesive, all available at your local hardware store. All other hardware and Allen wrenches are provided along with a step by step instruction manual. If you have questions we are happy to help, give us a call. Many of our customers prefer to have their T-Top and accessories professionally installed and locally supported. Please contact an authorized dealer for local sales and support.

Find installation video`s here

Yes, we include instructions on how to do this in the T-Top installation manual.

The overall dimensions of our 5 rod rocket launcher is just over 24" (616mm) wide.

Shop Rod Holders Here

The inner flange is 1.25 inches. The outer flange on top is 1 7/8 inch, the bottom flange is 7/8 inch. Width of opening past inner flange is is 20 1/2 inches long by 6 7/8 inches high.

The Fishmaster T-Top will fit all fishing boats with center consoles up to 50" wide. The innovative design allows the side legs to adjust to any width up to 50". The legs on each side (front to back) are 27.5" apart (center to center), and 31.5" apart (outsides of mounting feet).

Shop T-Top Here

Normally about five minutes. There are two bolts that need to be removed from each of the four legs for the T-Top to fold forward. Then two bolts are removed from each side of the top section to allow it to fold. Only one bolt is required for each location except when used in rough water or when over 20 lbs of accessories are attached to the top. For customers that need to more regularly put their T-Tops up and down a quick release knob kit is available.

Shop Pro Quick Release Knobs / Original Quick Release Knobs Here

The top is 60" wide by 80" long and stands 81" above the floor of the boat. The following links provide detailed drawings of the T-Top dimensions. T-Top Dimensions PDF The T-top with fabric weighs right at 108 lbs with 4 rod holders attached.

The tubing is 1-1/2" schedule 40 pipe with a 1.900" outside diameter. The tube material is 6061-T6 marine grade aluminum that is polished and bright dip anodized which is the industry standard for T-Tops, wakeboard towers, radar arches, tuna towers, etc. All the hardware is 316 grade stainless steel, also a workhorse of the marine industry. The fabric is Sunbrella Marine grade Acrylic.

Yes. All tubing is 6061-T6 aircraft grade aluminum that is polished and protected with a bright dip anodized finish. All hardware is marine grade stainless steel. It is recommended to wash after saltwater use and occasionally protect with a marine grade aluminum polish.

We have an electronics box available as well as various brackets for the Fishmaster that can be used to mount antenna, radars, etc.

Shop electronics box here

Shop Mounts here

We only provide the Fishmaster T-Top in a polished and anodized finish. The is the most durable finish for salt water environments. If you would like to have a custom color we recommend that you purchase a polished T-Top and work with a local powder coater to match the finish to your desired color.

Normally about five minutes. There are two bolts that need to be removed from each of the four legs for the T-Top to fold forward. Then two bolts are removed from each side of the top section to allow it to fold. Only one bolt is required for each location except when used in rough water or when over 20 lbs of accessories are attached to the top. For customers that need to more regularly put their T-Tops up and down a quick release knob kit is available.

Shop Pro Quick Release Knobs / Original Quick Release Knobs Here

The tubing is 1-1/2" schedule 40 pipe with a 1.900" outside diameter. The tube material is 6061-T6 marine grade aluminum that is polished and bright dip anodized which is the industry standard for T-Tops, wakeboard towers, radar arches, tuna towers, etc. All the hardware is 316 grade stainless steel, also a workhorse of the marine industry. The fabric is Sunbrella Marine grade Acrylic.

Yes. All tubing is 6061-T6 aircraft grade aluminum that is polished and protected with a bright dip anodized finish. All hardware is marine grade stainless steel. It is recommended to wash after saltwater use and occasionally protect with a marine grade aluminum polish.

Like our beloved spouses, the Fishmaster T-Top is very low maintenance. The only maintenance needed is to occasionally polish the aluminum as you do the other metal items on your boat. If you use your boat in salt water rinsing down the T-Top after use is recommended.

Yes, we include instructions on how to do this in the T-Top installation manual.

Yes, all tubing is the industry standard 1-7/8" (1.90") outside diameter.

Yes, It was designed for travel at highway speed like all other T-Tops. Since the cover is flat there is very little resistance on the top fabric.

The tubing is 1-1/2" schedule 40 pipe with a 1.900" outside diameter. The tube material is 6061-T6 marine grade aluminum that is polished and bright dip anodized which is the industry standard for T-Tops, wakeboard towers, radar arches, tuna towers, etc. All the hardware is 316 grade stainless steel, also a workhorse of the marine industry. The fabric is Sunbrella Marine grade Acrylic.

We provide several ways to make sure you believe in the Fishmaster products as much as we do. First we provide the Best in the Industry 5 Year Warranty against defect in parts or workmanship. We will repair or replace any defective part at no charge to you. Next we provide a 30 day - No Questions Asked "Love it or Return" Money Back guarantee. Simply ship it back with a note on why you are returning it and we will refund your money, less our cost to ship the product to you.

Take a look at .the shipping page